Automatic Powder Coating Gun
COLO automatic powder coating guns makes powder application more efficient and cost effective.
100KV powder spray gun
pluse power powder coating controllor unit
with 10m powder hose ,cables , spare parts
COLO-660 Electrostatic Powder Manual Coating Equipment,is designed exclusively for electrostatic coating with powder.
1,Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts.Easy to operate.
2,suitable for the coating of every workpiece. simple, flat workpieces;workpieces with complicated shapes; the over-coating of workpieces which are already coated.
3,Pulse coating system
1). Save powder by 20% compare to Electrostatic Coating ,for the average thickness of our products is 60 μm compare to 70 μm of the latter.
2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine .
A) Control unit
Input voltage: 110V-220V
Input powder: 50W
Pneumatic control voltage: 24V DC
B) Compressed air data:
Max. Input air pressure: 10bar/145psi
Min input air pressure: 6bar/87psi
Max water vapour content: 1.3g/nm
C) Powder Spray Gun
Powder yield: 600g/min
Gun powder: 550G