Home > Hopper feed unit >

KCI 301 powder coating system

KCI 301 powder coating system

  • Price
  • /piece
  • Model
  • COLO-660
  • Quantity
  • piece(Unlimited)
Detail Information
Detail Information

Typical characteristics:
1, Control unit has one-touch intelligent operation button good for flat parts, complicated parts and recoat parts. Easy to operate.

2, suitable for the coating of every workpiece. Simple, flat workpieces; Workpieces with complicated shapes; The over-coating of workpieces which are already coated.

3, Pulse coating system
1). Save powder by 20% compare to Electrostatic Coating, for the average thickness of our products is 60 μ M compare to 70 μ M of the latter.
2). Can coat the objects' deepest corner by charging the powder continuously with low current and high voltage.
3). Can reduce orange peel effect significantly compare to common Electrostatic Coating machine.

Configuration:
A control unit power supply cable
- A air filter
- A air pressure regulator
- A fluidized powder hopper
- A plug-in injector
- An manual powder gun with gun cable, powder Hose, rinsing air hose and standard nozzle set.
- Pneumatic hoses for conveying air (red), supplementary Air (black) and fluidizing air (black)
Powder hose
Ground wire

Data:
A) Control unit
Input voltage: 110V-220V
Frequency: 50-60Hz
Input powder: 50W
Pneumatic control voltage: 24V DC
B) Compressed air data:
Max. Input air pressure: 10bar/145psi
Min input air pressure: 6bar/87psi
Max water vapour content: 1.3G/nm
C) Powder Spray Gun
Powder yield: 600g/min
Gun powder: 550G
Connection cable: 5m

Packing Dimensions
Model No. COLO-660
Length: 84cm
Width: 52cm
Height: 68 cm
Weight: 37 kgs.


KCI 301 powder coating system
  • KCI 301 powder coating system
Please send your message to us
* We will reply your inquiry to this Email as soon as we see it(All fields are required.)
E-mail
 
  • /
Title
Content

Agree to use terms of service